top of page
  • Go to the App Store.

  • Download the latest version of the "Kaidu Config Application".

  • Open the application.

  • If the application isn't scanning, press the 'Scan' button to initiate the process.

  • If your scanner doesn't appear on the list, approach the scanner and press the button on the top of the scanner for 3 seconds, then release it (the LED will blink white).

  • If the scanner still isn't visible, repeat the second step a few times.

  • If the issue persists, reset the scanner by unplugging it from the power source for 10 seconds, then restart from the first step.

Screenshot 2023-10-17 at 11.36.36 AM.jpg
  • Open the application.

  • Allow the application to use location while the application is being used.

  • Location permission is needed for the application to access Bluetooth functions.

File (3).jpg
  • If the scanner is advertising you will see it listed on the screen.

  • The scanner's colour on the application or the LED on the scanner will tell you if it is connected or not.


Green - Scanner is connected

Blue - Scanner is trying to connect

Red - Scanner has issues

  • On the list of Wi-Fi SSIDs, you can simply select one from the list, enter the password and press the Confirm button on the next screen.

  • Or if f you do not see your WiFi on the list you can press the refresh icon on the top right of the screen.

  • If you prefer you can also enter your SSID manually by clicking Other.

  • Please note that only 2.4 GHz Wi-Fi networks are supported. Take care to avoid making any typos, SSID and passwords are case-sensitive.

  • Click on the displayed scanner to set up the Wi-Fi settings. (The LED on the connected scanner will turn solid BLUE to indicate it is connected to the app)

  • Click on the arrow beside the Wi-Fi to select your SSID or enter your SSID details. And then click on Confirm.

  • If you do not wish to change the Wi-Fi setting displayed, close the application or click on confirm.

  • Once you press confirm the scanner will reboot and attempt to connect to the network. If successful the LED on the scanner will turn GREEN. (Be patient this might take a few seconds)

bottom of page